Picked up half a conversation from the international space station today on VHF with just a handheld radio. Cool!
Cool! My todo manager application, dstask, has been featured in a 6-page spread in LinuxUser, a German magazine
Just installed an xstation into a Playstation 1. Great to keep this old console alive! Ps1digital next, maybe. I also added a brook Bluetooth converter for use with a PS3 controller.
#OpenSCAD drill template for a junction box. I was able to test-fit before drilling, and it sped up the process 10x.
Failed attempt at converting an UBNT Unifi switch to an EdgeSwitch. I read the 32MB MX25l25635F on my ES-16-150W using my CH314A with flashrom. The PCBs are identical! Serial console shows It boots, but with no ethernet. Must be a lockout in the firmware to prevent this…
Quick TFTP recovery of an Edgerouter-X after a failed update. It’s strange seeing Debian 9 boot up on a router. It runs EdgeOS, based on Vyatta, based on Debian. It was running OpenWRT for a bit, but now I’m back to EdgeOS thanks to
Evening paddle!
Tilted bulkhead light conduit adapter designed in @openscad . Neat huh?
Now flashing my x230 with @coreboot_org !
Quick HP common rail PSU mod to upgrade my questionable PSU in my 3D printer. Now the vdroop is tiny, and It’s probably safer. Especially with a fuse. Ha.
Experimenting with Mobilenet SSD based object detection for CCTV and an automatic doorbell. Works well, even if my wife’s car is sometimes a bird. Powered by just python-opencv using a pre-trained net
Finally got round to doing my #ThinkPad X230 1080p IPS display upgrade powered by @nitrocaster‘s fantastic adapter board. The screen is 10x better than the TN 1366x720 original.
Just fixed my 21 year old Sony amplifier which had a faulty left channel. Turns out the speaker output relay was dodgy and there were dozens of cracked solder joints. Now it’s my workshop HiFi!
My 3D printed gate latch designed in my absolute favourite CAD software @openscad
My latest #RaspberryPi 3 project – 3D-printed PoE powered touchscreen display. Looking forward to the new PoE hat! It’s for my heating system at home, currently running #grafana, deployed with #ansible. Moving away from proprietary kindle fire tablets
Well done #siri.
@EventGeniusLtd “100% Safe and Secure” yet the ordering page is loaded over HTTP? Ridiculous.
@ukcloudltd do I really have to un-tick 37 boxes to unsubscribe to your newsletter?
Finished making a huge 2 driver folded 4m horn subwoofer (HT use) with @Steen_Bryant (BFM Table tuba) Write up?
My home automation sys. There’s a Pi there somewhere. Connects to house alarm for PIRs, Hue, wall tablets, battery backup @Raspberry_Pi
